banner
Apr 24, 2022
0 View
0 0

The most budgetary do-it-yourself vibrating table from a door, tires and a washer engine

In the production of paving slabs or other concrete products, good compaction of the mortar is very important. It is impossible without the use of a vibrating table. Such necessary equipment is actually very simple, so it is easy to do it yourself with minimal investment.

The most budgetary do-it-yourself vibrating table from the door of tires and the engine of the washer

Materials:

  • Old car tires – 4 pcs.;
  • wooden shield or sheet metal;
  • boards;
  • pulley motor. The electric motor from the washing machine is perfect.
  • wood screws;
  • switch;
  • plug wire.

Vibrating table manufacturing process

From two boards it is necessary to make the base of the table, laying them parallel. An electric motor with an eccentric is screwed onto them in the center. The latter is a pulley with a groove on one side for imbalance. Opposite it, a bolt with a weighting agent is scrolled to it, in this case, a pipe clamp. Thus, the rotation of the motor will be accompanied by a strong rattle.

The most budgetary do-it-yourself vibrating table from the door of tires and the engine of the washer

On the sides of the engine, two tires fit on the boards. They are pulled together by self-tapping screws screwed through the adjacent sidewalls. These racks are also attached to the boards with screws.

The most budgetary do-it-yourself vibrating table from the door of tires and the engine of the washer

Then the table turns over and is installed on the tires, which will listen to its legs. Now the tabletop is laid on the wooden base. It can be an old door, a wooden shield or sheet metal. The tabletop is screwed to the boards.

The most budgetary do-it-yourself vibrating table from the door of tires and the engine of the washer
The most budgetary do-it-yourself vibrating table from the door of tires and the engine of the washer

When the engine is turned on, the tabletop will vibrate. For convenience, starting the motor can be done through the switch.

The most budgetary do-it-yourself vibrating table from the door of tires and the engine of the washer

It also does not hurt to screw the sides to the countertop so that the forms with concrete do not fall from vibration.

The most budgetary do-it-yourself vibrating table from the door of tires and the engine of the washer

Watch the video

Article Categories:
Interesting
banner

Leave a Reply