banner
Sep 11, 2020
23 Views
0 0

Rack for splitting wood with a hammer from an old car disc

Rack for splitting wood with a hammer from an old car disc

If periodically comes to chop small firewood for the barbecue, you can make a special rack for this. It is safer than an ax, since the scattering of chopped firewood is excluded, and it pricks quieter.

What you need:

  • old car drive;
  • trumpet;
  • thick steel strip.

Stand making process

The first step is to cut the disc. The base of the rack only needs its rim.

Rack for splitting wood with a hammer from an old car disc

After that it is necessary to bore 2 opposite half-holes for pipe welding.

Rack for splitting wood with a hammer from an old car disc

Next, 2 pipe sections of 45 cm are prepared. They are welded to the disc vertically.

Rack for splitting wood with a hammer from an old car disc

Rack for splitting wood with a hammer from an old car disc

Rack for splitting wood with a hammer from an old car disc

Then, a sharpened strip must be welded between them.

Rack for splitting wood with a hammer from an old car disc

Rack for splitting wood with a hammer from an old car disc

Rack for splitting wood with a hammer from an old car disc

Finally, you need to expand the hole in the cut part of the disc and weld it onto the pipes.

Rack for splitting wood with a hammer from an old car disc

Rack for splitting wood with a hammer from an old car disc

To use the stand, you need to put a log or board into it on a sharpened strip, and hit it from above with a hammer. As a result, the block will neatly split.

Rack for splitting wood with a hammer from an old car disc

Watch the video

Article Categories:
Interesting
banner

Leave a Reply