banner
Nov 25, 2021
1 Views
0 0

How to wash finished embroidery and save the design

How to wash finished embroidery and save the design

How to wash the embroidery so as not to ruin the result of the long and painstaking work of the craftswoman, we will tell you in this material.

Painstaking work behind the hoop brings pleasure to many needlewomen. For some, this is just a hobby, but many craftswomen are professionally engaged in cross-stitching. A unique do-it-yourself drawing with threads on the canvas will be an expensive gift to friends and family.

How to wash embroidery products

Can cross stitch canvas be washed? Yes, but remember that the floss are quite capricious threads.

Many have come across the fact that, during contact with warm water, the threads shed and spoil the pattern. To prevent this from happening, you need to select high-quality canvas and threads for embroidery and wash the embroidery in compliance with some rules.

Thin and fragile, they quickly lose their color saturation under the influence of an aggressive environment – high temperatures, chemicals.

Therefore, cleaning agents should be free from chlorine, hydroperite and other decolouring components.

It is enough to wash new work in cool, flowing water with soap and water.

You can use the following for washing and soaking without fear:

  • Detergent for colored fabrics.
  • Liquid soap, shampoo – but only colorless.
  • Regular laundry soap.
  • A solution of water and powder for hand washing (the resulting product must be filtered to get rid of the powder grains).
  • Dishwashing gel. Opinions are divided about it: some of the needlewomen consider it suitable for washing embroidery, some absolutely disagree with them. Opponents of “Fairy” and its counterparts argue that formulations aimed at combating fat, dry out the fine fibers of the floss, spoil their structure.

You cannot twist it, so as not to stretch the stitches, not to wrinkle the fabric. It is necessary to smooth the picture with the palm of your hand and dry it, spreading it horizontally on a terry towel. After the moisture has been absorbed, the embroidery dries, it can be ironed from the inside out with a not very hot iron. The drawing should remain convex. Therefore, it is good to use a steam generator.

How to remove stains

Stains must be treated before washing the entire garment. The main thing is to correctly determine the nature of pollution. Stains from different substances are removed from the fabric in different ways.

For example:

  • inks are covered with Antipyatin soap;
  • coffee beans are removed with peroxide;
  • traces of rust or black tea are well removed by a solution of vinegar or citric acid;
  • removes cream stains with alcohol;
  • a yellowed stain from a hot iron must be rubbed with a swab with hydrogen peroxide until the original color returns;
  • mold traces disappear under the influence of baking soda solution.

To prevent the dirt from spreading, the cleanser is applied only to the stain on the seamy side of the canvas. After treating the local spot, the embroidery is washed without any soaking.

Often home economics magazines advise removing stains with acetone, glycerin, gasoline. It is impossible to guess how these aggressive agents will behave on colored embroidery.

Therefore, it is not worth the risk, there are many modern tools that will cope better. As a last resort, oxygen bleach can be used. It does not “eat up” colors as much as chlorine.

Tips to help keep your embroidery in perfect condition

  • Always secure the ends of the threads with a knot or any other method you are accustomed to. Otherwise, the floss will fluff up during washing, or part of the pattern will completely bloom.
  • Before washing, be sure to process the edges of the canvas so that they do not start to crumble during the process. This can be done in any convenient way: with PVA glue, colorless nail polish, zigzag stitching along the perimeter, done on a washing machine. Someone is putting on moisture-resistant duct tape.
  • Some needlewomen wash the embroidery like this: fix it with pins on the foamed polyurethane, then treat it with soapy water and rinse it. The method is also good for leveling a slightly skewed product.

Remember to finish the edges of the canvas before washing.

  • If short stitches are stretched and sagged after washing, it is better to cross these low-quality places with a cross again, dissolving the defect. Another way is to lightly pull up from the inside and secure with stitches.
  • Do not wash work with metallic threads. It is easier to refresh the embroidery, dry it, iron it, and then embroider the elements with this material. The same can be said about the imposition of long stitches, ribbons, cording (sewn on threads, twisted into cords), bead elements.
  • If the embroidery is a little skewed, then such an invention as a steam generator will help to return it to its correct shape. The product must be attached to a rigid base that fixes its position, and then steamed with the device. In this position, the embroidery is left for several days after the steam treatment for greater form fixation.

The steam generator will straighten the deformed embroidery

  • If the embroidery pattern is applied with a washable marker, then this case is removed under cold running water before soaking. However, not all types of dye can be removed in this way, which is why be sure to read the instructions for the set before starting the wash.

Cross-stitch embroidery is one of the most popular hobbies even nowadays. The work itself calms the nerves, relieves stress, teaches perseverance, attentiveness, patience.

The result of handicraft is amazing – an embroidered picture is an exclusive decor item or a lovely gift to family and friends.

We hope that now, after reading this material, you will not have any difficulties with this kind of washing.

Article Categories:
Interesting
banner

Leave a Reply