banner
Nov 1, 2021
0 Views
0 0

How to pull a budget mesh fence with your own hands

How to pull a budget mesh fence with your own hands

One of the most budgetary options for fencing a personal or summer cottage is a mesh fence. For its construction, no welding work is required, no special skills and expensive tools are required. To begin with, with the help of a twine, a line is outlined along which the fence will be built, and on it the places for installing the posts. The distance between the posts should be 2.5-3.0 m. As the posts, you can use a 40×40 mm profile pipe, or a round pipe of at least two inches in diameter. Old pipes are also suitable for posts, which can be purchased inexpensively at a scrap metal collection point. The pillars are concreted to a depth not less than the depth of soil freezing, for the middle strip it is about half a meter.

How to pull a budget mesh fence with your own hands

We proceed to tension the fence from the chain-link mesh

The cheapest means of keeping the net taut is a cable. The metal-polymer rope, protected from oxidation, will last longer.

How to pull a budget mesh fence with your own hands
How to pull a budget mesh fence with your own hands

To bring the cable into the posts, holes are made in them with a drill at the selected height.

How to pull a budget mesh fence with your own hands
How to pull a budget mesh fence with your own hands
How to pull a budget mesh fence with your own hands

Depending on the height of the net, two or three ropes are needed in height. With the help of a special clamp, the cable is fixed on the extreme post.

How to pull a budget mesh fence with your own hands
How to pull a budget mesh fence with your own hands

Then the net can be unwound. By the way, you can also extend the service life of the fence by using a plastic-braided wire mesh.

How to pull a budget mesh fence with your own hands

After unwinding the net and placing it between the posts, a cable is pulled through the cells at the intended height.

How to pull a budget mesh fence with your own hands

The cable is inserted into the holes on the posts.

How to pull a budget mesh fence with your own hands

After inserting the cable, it is stretched and fixed on the last post with a clamp, just like on the first.

How to pull a budget mesh fence with your own hands

That’s all, the fence is ready.

How to pull a budget mesh fence with your own hands

Article Categories:
Interesting
banner

Leave a Reply