banner
Nov 5, 2021
0 Views
0 0

How to make a neat seam. Simple Tips for Easy Handling of Silicone Sealant

How to make a neat seam Simple tips for easy handling with silicone sealant

Silicone is an excellent sealant with a wide temperature range and versatility. In addition to its practicality, it also, with proper skill, allows you to get a high-quality, beautiful seam in every sense. Let us examine in detail the features of working with silicone sealant.

What you need:

  • Degreaser;
  • napkin or rag;
  • silicone sealant;
  • sealant gun;
  • sprayer with soapy water;
  • plastic figured spatula for silicone;
  • paper towels or toilet paper;
  • masking tape.

Suturing process using a soapy solution

The surface to be coated with silicone must first be cleaned and degreased. Silicone is applied from the extreme point of the corner or junction of materials, the gap between which needs to be closed. It is better to squeeze it out more than less. It is important to avoid gaps. It is recommended to apply a seam no longer than 1 meter at a time.

How to make a neat seam Simple tips for easy handling with silicone sealant

A soapy solution is sprayed onto the silicone. It will wet the opening of the adjacent surfaces, and will not allow the sealant to stick when removing excess. It is important not to spray on the edge of the joint, if it is not finished, and on the surfaces where the silicone will still be applied.

How to make a neat seam Simple tips for easy handling with silicone sealant

You should also spray soapy water on the cut-off silicone spatula. If there is no such tool, then you can use a plastic card. The corner is cut off from it so that the cut length is 6 mm. Then, with a wet spatula, it is necessary to hold it in the corner along the seam, removing excess sealant.

How to make a neat seam Simple tips for easy handling with silicone sealant
How to make a neat seam Simple tips for easy handling with silicone sealant

The result is a perfect seam. Due to the fact that there is a cut at the corner of the spatula, the sealant forms a triangle in the cross section. Thus, the silicone does not get thin edges, so it does not peel off further under mechanical stress.

How to make a neat seam Simple tips for easy handling with silicone sealant

To obtain a neat corner seam, silicone is applied on both sides. After moistening with soapy water, the seam is formed with a spatula in one motion. If it doesn’t work the first time, then make the second pass after additional spraying.

How to make a neat seam Simple tips for easy handling with silicone sealant
How to make a neat seam Simple tips for easy handling with silicone sealant

Seam forming process with masking tape

If you cannot use a soap rotor, for example, at the junction of a painted slope and a plastic window, or a tile and a plaster ceiling, then masking tape is used. It is glued on both sides along the gap, previously cleaned and degreased.

How to make a neat seam Simple tips for easy handling with silicone sealant

Apply the silicone as carefully as possible, then remove the excess with your finger. Due to the thickness of the tape, the edges will not be too thin to flake off.

How to make a neat seam Simple tips for easy handling with silicone sealant
How to make a neat seam Simple tips for easy handling with silicone sealant

Tear off the tape immediately before the sealant is dry.

How to make a neat seam Simple tips for easy handling with silicone sealant

If you apply a little sealant, or make gaps, then a beautiful seam will not work. In some places, the spatula will not be able to reach the silicone in order to smooth it. As a result, irregularities are obtained, and the gaps will remain. If a soap solution was used before leveling, then an additional portion of the sealant will no longer stick to these pits, so you will have to remove and redo everything.

When working with silicone, unevenness can only be corrected immediately after leveling with a spatula. When the sealant has dried, it will not work to remove the defect without making it even more pronounced. Sometimes it is better not to do anything with small rises or dimples than to leave ragged dents with your finger later.

How to make a neat seam Simple tips for easy handling with silicone sealant

Also, you cannot apply a long seam at a time, since while the first meters are equal with a spatula, the rest of the sealant will dry out. Removing the weathered silicone results in a ragged surface with bumps.

By following these tips, you will be able to create the perfect silicone seam between tub and tile, floor and wall, kitchen countertop and backsplash. Only when working, be sure to remove excess silicone from the spatula. Just wash them on a tissue or toilet paper. After that, a clean spatula is placed in front of the tear-off point, and is carried on further.

How to make a neat seam Simple tips for easy handling with silicone sealant
How to make a neat seam Simple tips for easy handling with silicone sealant
How to make a neat seam Simple tips for easy handling with silicone sealant

Watch the video

Article Categories:
Interesting
banner

Leave a Reply