banner
Jan 11, 2022
4 Views
0 0

How to install a tap in a tank or barrel

Owners of private houses and summer cottages are often faced with the need to install a crane in a tank or barrel. This may require when assembling an irrigation system, nipple watering for animals, and installing an outdoor summer shower. Putting in a crane is very easy, you just need to purchase the right materials.

How to install a tap in a tank or barrel

What you need:

  • Fitting, stub into the tank 1/2 “;
  • ball valve with 1/2 inch female thread;
  • silicone sealant.

High-quality and durable drills on Aliexpress at a discount – http://alii.pub/5zwmxz

How to install a tap in a tank or barrel

The process of tapping a tap into a tank or barrel

The first step is to mark the place for the inset on the container. The lower it is, the less unused water will be. Then you need to drill a hole for the fitting. If there is no crown of the corresponding diameter, then you can circle the inset with a marker, and then make a perforation along the contour with a thin drill.

How to install a tap in a tank or barrel

From the outside, it is advisable to degrease the surface around the hole. Then, from the inside of the container, a fitting with a gasket is inserted into the hole.

How to install a tap in a tank or barrel

The same gasket and nut are installed outside. If the container has round walls, then it is sometimes impossible to tighten the nut so that the gaskets are evenly squeezed and ensure complete tightness. In this case, additional silicone sealant must be applied. It will fill in the irregularities and there will be no leakage.

How to install a tap in a tank or barrel

Then the tap itself is screwed onto the fitting. Seal the threads with an anaerobic sealant, flax or fumlent. That’s it, the container can be filled with water and used as directed. If silicone was used, it is better to wait a day for it to dry.

How to install a tap in a tank or barrel
How to install a tap in a tank or barrel

Watch the video

Article Categories:
Interesting
banner

Leave a Reply