banner
Oct 14, 2020
25 Views
0 0

How to flush a bolt head into a tree

How to flush a bolt head into a tree

When assembling furniture and various wood products, sometimes you have to tighten the parts with bolts. In this case, for their preparation, you need to cut out a hexagonal sweat. This is usually done with a chisel in 10-15 minutes, but having made this tool, the pot can be cooked in a minute.

What you need:

  • an elongated nut that matches the size of the bolt head for installation;
  • grinder with cutting disc;
  • vice;
  • triangular file.

How to flush a bolt head into a tree

Tool making process

In an elongated nut, you need to make a cut at the end with a depth of 5-10 mm, leaving any 2 faces opposite.

How to flush a bolt head into a tree

The resulting gap is trimmed with a file.

How to flush a bolt head into a tree

From the inside, a descent is brought out on the edges and a tip is formed.

How to flush a bolt head into a tree

A blind hole is drilled on a wooden surface on which you need to make a sweep with a drill corresponding to the diameter of the threaded part of the bolt.

How to flush a bolt head into a tree

Then a ground nut with a baited bolt is inserted into it for centering. Further, by blows on its head, the teeth are driven into the tree by 2-3 mm. The tool is turned and driven in again.

How to flush a bolt head into a tree

After assigning the contour, the bolt is unscrewed. Next, you only need to drive in the nut.

How to flush a bolt head into a tree

As the delamination progresses, the wood is picked out with a screwdriver.

How to flush a bolt head into a tree

How to flush a bolt head into a tree

After 1-2 minutes, sweep under the head of the bolt or nut is ready.

How to flush a bolt head into a tree

How to flush a bolt head into a tree

Watch the video

Article Categories:
Interesting
banner

Leave a Reply