banner
Sep 16, 2022
0 Views
0 0

How to easily and quickly clean the soleplate of an iron: you will need simple tools

How to easily and quickly clean the soleplate of an iron: you will need simple tools

Scale builds up in irons some time after use and stains may appear on clothes. Also, if the fabric is ironed at the wrong temperature, it will most likely melt and stick to the sole of the device. Therefore, it is worth figuring out how to clean the iron. Writes about it SantePlus.

Even if you regularly take care of the iron, unpleasant situations can often arise due to inattention. To save the device, you will need special cleaning.

How to clean a ceramic coated iron

Ceramic irons are more durable, but sometimes they burn on fabrics. When you want to remove burn marks and pesky dirt, the key is to be careful not to damage the sole.

In particular, for this you need to take baking soda. To use this method, you need:

  • Dissolve a few tablespoons of baking soda in water;
  • Heat the iron, then disconnect it from the mains;
  • Wait for it to cool down a bit before gently applying the baking soda paste;
  • Leave the paste for 5 minutes;
  • Then wipe off any dirt with a paper towel.

What to do with Teflon iron

Teflon coating on the sole is the most resistant material for cleaning. Because it is very fragile and can be easily scratched. You have to be very careful and delicate.

Therefore, the use of salt or soda for such cleaning is strictly prohibited. It is necessary to remove all the dirt on the soleplate with white vinegar.

You must follow the following instructions:

  1. Apply white vinegar to a soft or cotton cloth;
  2. Next, gently wipe the burnt tissue;
  3. Then wipe the iron with a damp cloth.

Iron with steel soleplate

One of the most popular ways to clean a burnt iron with a steel sole is to use table salt. Indeed, if the sole is flaky, dirty and burned, salt will do.

The method is very simple:

  • Lay a piece of parchment paper on the sole;
  • Sprinkle generously with salt;

Set the iron to a high temperature and run it over the paper several times in different directions.

Article Categories:
Interesting
banner

Leave a Reply