banner
Apr 25, 2022
0 Views
0 0

How to cheaply make a pond in the garden from affordable materials

It’s nice to have a pond with ornamental fish in your garden that you can watch. With the seeming complexity of such a project, in fact, it is quite possible to do it yourself, and using affordable inexpensive materials. Consider how to do it with minimal investment.

How to cheaply make a pond in the garden from affordable materials

Materials:

  • Burlap or rags;
  • cement;
  • sand;
  • brick;
  • plastic water pipes 20-25 mm;
  • pebbles;
  • stones and cobblestones;
  • glass;
  • silicone sealant;
  • aquarium pump.

The process of building a pond in the garden

To make the walls of the pond, you need to cut burlap, blankets or other rags. The resulting pieces are impregnated in a solution of cement with water. Then they are laid out on a wave slate.

How to cheaply make a pond in the garden from affordable materials
How to cheaply make a pond in the garden from affordable materials

Concrete is applied on top of the soaked rags, consisting of cement and sand mixed in equal proportions. It is necessary to make a thick solution so that it does not spread. We form a block of the future wall on a fabric litter, and leave to dry.

How to cheaply make a pond in the garden from affordable materials

After a couple of days, wave blocks can be used. They are installed on a prepared base. Under them, a masonry mortar of sand and cement is applied. The shape of the pond is made arbitrary to your taste.

How to cheaply make a pond in the garden from affordable materials

On the front side of the pond, you need to put two blocks, leaving a gap between them under the sight glass. Part of the walls are laid out of brick. Immediately put a tube into the wall to drain the water.

How to cheaply make a pond in the garden from affordable materials

How to cheaply make a pond in the garden from affordable materials

Behind the back wall of the pond, opposite the future viewing window, a collector is laid out to filter the water. In the future, it will flow out of it, and fall into the bowl of the pond. The front wall of the collector is made lower than the back and side walls.

How to cheaply make a pond in the garden from affordable materials

The walls of the pond are made of brick and need to be plastered with a thick layer, and even smooth sides should be formed. You can trim the plaster with foam rubber or a sponge dipped in water.

How to cheaply make a pond in the garden from affordable materials
How to cheaply make a pond in the garden from affordable materials

The collector is also plastered. On it, you can make an imitation of a stone from the same cement with sand. It will look more realistic if its seams are embroidered.

How to cheaply make a pond in the garden from affordable materials

At the bottom of the bowl is poured, and wet sand is leveled. Concrete is poured on top of it. Overflow pipes are laid on the front wall of the collector, through which water can flow into the bowl. Concrete is poured to fix them. The ends of the pipes will need to be cut at 45 degrees.

How to cheaply make a pond in the garden from affordable materials

When everything dries a little, you can move on to painting the sides and walls of the collector, but only on the outside. Next, a sight glass is glued onto the silicone sealant.

How to cheaply make a pond in the garden from affordable materials

The filtrate is placed in the collector. Any filler for a biological filter, such as ceramic rings, crushed stone, large-pored sponge, is suitable as it.

How to cheaply make a pond in the garden from affordable materials

An aquarium pump is placed in the bowl of the pond, and the hose from it is brought to the bottom of the collector. Thus, when pumping is turned on, water will be supplied to the filter, and being cleaned, it will fall from above. All this equipment must be hidden under stones. To decorate the pond, plastic decor or live plants are used.

How to cheaply make a pond in the garden from affordable materials
How to cheaply make a pond in the garden from affordable materials

Rough concrete floor should be covered with pebbles. The bowl is then filled with water. After that, you can turn on the pump. As a result, not only filtration, but also aeration of water will occur. After a couple of days, when the biological balance improves a little in the pond, picky fish species can be launched into it. Inhabitants more sensitive to biobalance will be able to live in it in a few weeks.

How to cheaply make a pond in the garden from affordable materials

Watch the video

Article Categories:
Interesting
banner

Leave a Reply