A lot of useful and necessary things can be done in just a couple of minutes, and then you can use this for decades. Indeed, the simpler something is, the more reliable it is. We offer a selection of affordable ideas for your workshop and home.
1. Automatic lubrication of drills
To make such a device, you will need to disassemble a small paint brush by removing the sleeve. It is put on the spout of a bottle of oil, and fixed with heat shrink. In this way, the oil will constantly moisturize the brush.
This device is placed on the drilling machine so that the pile touches the drill. As a result, it will be continuously lubricated.
High-quality and durable drills on Aliexpress at a discount – http://alii.pub/5zwmxz
2. Enlargement of the nail head
If you need to increase the area of the head of the nail, just put a blind rivet skirt on it. The latter is easily removed after a couple of hammer blows on the rod.
3. Magnetic clip for curtains
For the manufacture of the latch, we take a long hot-melt adhesive rod. We melt its edges, and glue magnets on them. As a result, we get a latch to hold the assembled curtains.
4. Device for blowing holes
To blow holes in the wall, we drill a hole in the cap of the PET bottle. We insert a short tube into it, and fix it with hot glue.
To purge the hole, insert the end of the tube into it. Then quickly press the bottle to create a stream of air.
5. Double stranding of wires
Twisting wires can be done not only at their ends, but also anywhere. We simply strip the insulation on two wires, and fold them in half. Next, we hook the wires together with loops, and twist. The result is a connection that cannot be broken.
6. Joining lumber with roller chain links
Roller chain segments can be used to connect rails, boards, bars. It’s a good replacement for mounting plates, and it’s free.
7. Rope bracket
We take a bolt, and sharpen two planes on its edge. Then we drill through it. Now we fasten the bolt where necessary, and pass the cable through the hole. To fix the latter, tighten the nut.
8. How to protect the outlet housing from paint
In order not to stain the socket or switch when painting the walls, glue masking tape around its circumference. Then trim the corners of the resulting frame. This allows you to tuck the tape, thereby closing the plastic housing of the outlet.
9. Tube rivet
The rivet can be obtained from a thin tube.
We put its segment on the nail, and tighten it with a rivet gun.
The tube is deformed, and then the nail can be removed.
Durable discs for angle grinders on Aliexpress at a discount – http://alii.pub/61bjly