Tricks and useful ideas have always been appreciated both in repair and in everyday life. They make life a lot easier and make it easier. Sometimes you don’t even guess what you can do, it would seem, from simple things. Here are just a small part of 5 useful tips that are sure to come in handy in life.
1. Useful refinement of the level
Example: when concreting a steel pole for erecting a fence, it must be kept strictly level. For this, a building level is usually used.
But the instrument does not stay upright. To fix this, you just need to modify it. To do this, remove the side plastic plugs and insert small neodymium magnets on the sides – http://ali.pub/4yy1yd
Now the level is perfectly fixed and it has become very convenient to use.
2. Knife sharpener
Making a knife sharpener from available materials is very simple. For you will need fasteners for the roof, sandpaper and a screw with a nut.
We remove the washers from the roof fasteners.
Sandpaper is folded in half and drilled.
We put a washer on the screw, then paper and another washer. Fix with a screw. Cut the sandpaper in a circle.
Now we clamp the screw in the screwdriver chuck and quickly sharpen the knife blade.
3. Fixtures for high-rise painting
To paint in a high-altitude and hard-to-reach place, you can endow an aerosol can with a simple fixture. This design can be assembled in 5 minutes. Take a handle from a mop or broom.
We attach a balloon to it with masking tape. Take the electrode, bend it and insert it into the tape winding as in the photo.
The bottom line is that when you press the end of the electrode, the balloon should “throw out” the paint.
We attach a long cord or wire to this tip.
Now, holding the black, the balloon can be understood high up. And if you pull the cord down, the balloon should paint.
4. PET bottle cable organizer
To beautifully and neatly assemble the wires together, it is not necessary to buy expensive organizers. It is enough to take a PET bottle, dissolve it on a tape using scissors or a homemade bottle cutter.
Next, wind the tape on a steel pin or tube and blow it with a building hair dryer.
The tape will take the form of a spiral and is perfect as an organizer for wires.
5. Turbo brush
Making a turbo brush is very easy. To do this, take a regular brush.
Drill it in the middle and insert a long bolt, fixing it with a nut.
Next, install the resulting fixture in the screwdriver chuck.
And we produce an active chimney sweep.
High-quality and durable drills on Aliexpress at a discount – http://alii.pub/5zwmxz
