banner
Apr 3, 2021
2 Views
0 0

2 ideas for using an old brush

2 ideas for using an old brush

Sometimes a tool is not enough for a convenient and quick performance of various works. Many of them can be bought, but to save money, most are easier to do with your own hands. Let’s consider 2 ideas of tools for self-production from the system of a paint brush.

Mini hand hacksaw

To make such a tool, you need to saw off the handle from an old paint brush.

2 ideas for using an old brush

A hole is drilled in it from the sawn end.

2 ideas for using an old brush

Then a jigsaw blade is hammered into it. If the blade is worn out, you can pull it out and insert a new one.

2 ideas for using an old brush

Such a tool will allow you to cut wood, metal, plastic and other materials in hard-to-reach places.

2 ideas for using an old brush

2 ideas for using an old brush

2 ideas for using an old brush

2 ideas for using an old brush

2 ideas for using an old brush

As you can see, this is an extremely useful and necessary tool that you can easily take with you and use without electricity.

Glass scraper with replaceable blades

A workpiece is cut from the aluminum corner.

2 ideas for using an old brush

Its length should be equal to the width of the prepared small door hinge.

2 ideas for using an old brush

On one shelf of the corner, 2 holes are drilled to connect with the hinge. The second only needs a hole in the center.

2 ideas for using an old brush

2 ideas for using an old brush

Saw a longitudinal hole in the handle of a paint brush with a cut-off brush. You need it to screw the corner.

2 ideas for using an old brush

2 ideas for using an old brush

A door hinge is screwed to the corner on the handle. A trapezoidal blade is inserted into it before clamping.

2 ideas for using an old brush

2 ideas for using an old brush

The result is a scraper for cleaning glass or any other smooth material.

2 ideas for using an old brush

2 ideas for using an old brush

To avoid cutting yourself, you need to make a cover for the blade. To do this, you need to warm up the plastic pipe, and squeeze it in a vice.

2 ideas for using an old brush

After the pipe has solidified, a cover is cut out of the flattened part.

2 ideas for using an old brush

2 ideas for using an old brush

Watch the video


Article Categories:
Interesting
banner

Leave a Reply